how to take apart delta pod vape pen


Not all vape pod systems have great battery life. Thankfully, the engineers at https://www.veexshop.com/ have integrated a high-capacity battery to allow you to vape for long periods of time without having to worry about charging the device often.

How To Take Apart To Check Fluid Level?

There are two ways to check the oil level

  • One way is to look through the small window
  • Or toss it to see if it’s empty or have something.

If you don’t find the window easily, unwrap it to the extent where you can find fluid.

How To Take Apart To Remove The Dead Battery

If your disposable vape pen is stored improperly or in cold storage, there are chances that the battery will drain out. So if it is not fully charged, check the indicator light.

Then, dismantle the box mod using small driver heads and remove the battery. Try to connect it to external sources. If it doesn’t work, it means it’s dead.

Throw it away following all the safety instructions.

How To Take Apart If a Vape Pen Gives a Burnt Taste?

A vape pen is all about flavor. But if it is not tasting well, then the reason is high-temperature. Coil type and quality also affect the taste.

Use the Torx or Allen Key to open the vape pen, but if tiny buttons pop out, you should be even more careful. Once you feel the coil is hotter than room temperature, throw the pen away.

Here I want to make it clear that Vape batteries are usually made of layered foil of a certain type of metal, but could also have a liquid energy storage mechanism. So, in this case, making a decision is easy and you can fix the issue. But if your pen has a disposable built-in Lithium power source, it becomes impossible to fix the issue.

what is a pod vape

 

Are you a long-term smoker looking to quit smoking? If so the Veex Vape pod https://www.veexshop.com/ is something that you should consider purchasing as it is the ultimate quit smoking tool available in the market.

What is a POD System?

POD or “ultra-portable systems” are essentially the middle-ground between your simple gas station vape pen and a $100+ box mod. The design is similar to that of a cartomizer, but with much more versatility in terms of liquid-capacity and power.

The fundamental difference between the traditional cartomizer and an ultra-portable POD system is that the POD systems are equipped with cartridges like JUUL Replacement Pods, that contain the coil, wick, and the e-juice–essentially everything you need.

These portable systems are also more powerful. While a vape pen or cigalike battery caps out at around 180mAh, ultra-portable devices can reach upwards of 300mAh.

Perhaps most impressively, POD systems are fairly cheap. For around thirty bucks, you can get scoop up what’s considered to be a high-end ultra-portable POD system, whereas lower-end models will cost as little as $15.

NEW: Suorin

Pros and Cons

Like any vaping approach, each path comes with its own benefits and drawbacks. In every case, your choice should be determined by your very own specific preferences and nothing else. Let’s take a look at some of the pros and cons of these ultra-portable vaporizers and see how they compare to the average device.

Pros

Broader Appeal

One thing that sets ultra-portable devices like Juul apart from your standard vape pen is that they’re incredibly easy to use. What’s more, POD systems are often pre-filled with higher quality e-liquids that appeal to the seasoned vape veterans.

Box mod users typically prefer e-liquids that have a higher VG ratio, since that’s what most sub-ohm tanks are built for. POD systems are equally capable of vaping those thicker e-liquids, thus giving vapers a broad range of unique vaping options with little—if any—sacrifice to the overall experience.

However, most new and beginning vapers will be attracted to the simplicity of the traditional vape pen that still dominates the market today—if only for the fact that they’ve made an impression on the public and the vape community for many years now.

The best news for all users is that, despite their smaller size, some ultra-portable cartridges are equipped with sub-ohm coils—a massive step up in technology that’s still totally inaccessible for your average everyday vape pen.

Stronger Nicotine Hit

A major advantage for newbies that’s offered by your everyday vape pen (at the expense of high-quality e-liquid) is their functionality with e-liquids that are mixed with ridiculously high nicotine levels. Since the average sub-ohm tank is suggested for use with liquids that offer nicotine between 3-6mg, beginning vapers most likely will not get enough nicotine from the standard box mod/sub-ohm tank setup. Despite this lack in flavor, there are still many vapers out there that prefer higher nicotine levels in their sub-ohm tanks. What works for them might not work for you, and vice-versa.

Ultra-portable devices can carry much more nicotine. This is due to their use with nicotine salts – an all-new delivery method that allows for higher concentrations of nicotine without sacrificing smoothness or flavor. In fact, a 24mg mixture of nicotine in a vape pen will almost surely provide an unpleasant vaping experience for the newbie. That same newbie could try a 50mg mixture of nicotine salts and not even bat an eye. Such is the joy of nicotine salts. Be sure to check out our tutorial What are Nicotine Salts? Beginner's Guide to Salt E-Liquid.

Leak Proof

Ah yes, the dreaded leaky tank. This is a problem that plagues vapers from all walks of life. As if carrying the juice bottles around wasn’t already bothersome enough, there’s also the possibility that a cap loosens up or liquid seeps through the smallest of openings.

Well, not with ultra-portable POD systems. Since these bad boys are pre-built and use disposable cartridges, there’s literally zero chances of running into the same leaky nonsense that comes with your average tank when using a non-defective POD system.

Intuitive

While not all ultra-portable devices conform to this design, many POD systems are activated by your breath. Granted, a single button isn’t exactly rocket science, but to a smoker looking for an authentic experience, what could be more authentic than inhaling without any other effort?

Compare that to a box mod, where the firing button is the least of your worries. Sure, you’ll probably find some basic vape pens that work the same way, but without the quality or power of a POD device.

Cons

Limited Flavor Selection

One of the best things about vaping is the vast and nearly infinite marketplace of e-liquids to choose from. There are literally endless combinations of flavors at your fingertips, spanning across hundreds of different brands and they’re growing every day. It’s something that vapers from all walks of life can enjoy—except for POD users, that is.

The problem (currently) with ultra-portable devices is that their unique designs require specific cartridges. This means that we’re limited by the flavor selection that the manufacturers provide. So if you see a POD system that you’d love to try, but are unimpressed with its compatible flavor selection (or vice-versa), then you’re out of luck.

Of course, this could all be old news some day and manufacturers will give generic companies a shot, but it’s hard to know exactly how long and we don’t suggest holding your breath. However, with the seemingly exponential growth of the the vape industry since 2006, odds are that the smaller companies will get their chance sooner than later.

Smaller Liquid Capacity

Obviously, smaller vaporizers will carry less liquid. Try to imagine forcing a 4mL tank onto a vaporizer that’s just a little larger than a cigarette – not going to happen.

While the tiniest POD devices can contain less than 1mL (which still amounts to roughly one pack of cigarettes), some of the larger POD systems can hit the 2mL mark.

Lower Battery Life

Although the battery life of these ultra-portable POD systems is higher than its smaller cousins, it simply cannot hold a candle to the big leagues. Box mods will always win the day when it comes to longevity. A typical ultra-portable device will get you about two to three hours of mild use on a full charge.

This won’t be as big of a problem for a box mod user, who might just carry the POD for portability while out on the town. But if you’re exclusively using a POD device and nothing else,  you may need to do so sparingly depending on where you’re at, so be sure to keep it charged.

Overall, ultra-portable POD systems do a great job of bridging the gap between beginners and veterans, while simultaneously appealing to both. Although there are some minor gripes to deal with, they’re fairly easy to overlook.

If you’ve been let down by vape pens or want something more low-key when out in public, you’ve got nothing to lose by trying out a POD.

A Beginner’s Guide To Vape / E Cig Batteries

 

Want To Know A Little More About Batteries Used For Vaping?


Vape pods are the best solution to finding an alternative to quit smoking altogether. It allows you to still enjoy the benefits of vaping nicotine with great tasting flavours all without the tar and no combustion taking place. You will notice the benefits of vaping straight away. Pick your Veex vape pod today at https://www.veexshop.com/

Battery Basics

Mods: Mechanical & Regulated
Amperage / Discharge Rate
Battery Capacity / mAh
Difference Between Series & Parallel
Calculating OHM’s Law

Recommended Batteries & Safety Tips

Recommended 18650 Batteries
Other Vape Batteries
Battery Wraps & How To Apply
Battery Safety Tips

Vape Battery Introduction

So…from knowing clear zero about electronics, Ohms Law and the nature of Vegetable Glycerine, you’ve gotten to the point of building your own low resistance coils and crafting your own e-liquids to get the most out of your vape.

The logical next step in the process is to get to the point where you know what’s up when someone talks about milliamp hours and battery wraps, when you can go on line and make an educated decision on which battery brand and specs to buy for your new mech or regulated mod.

You need to know about your batteries for vaping, not just so that you can get the most out of your vape but also for your own safety and the safety of your device. It’s just another one of the reasons why we love vaping so much, there’s always just a little more to learn!

While there are a number of battery sizes available, 18650’s are one of the most popular batteries currently used in vape mods.

Replaceable batteries extend the life of our mods because in themselves they’re disposable.

When the batteries lifespan is over, we don’t have to throw away the whole vape mod like we would on, say, a built in 3000mAh mod. That said, how on earth do we choose an 18650 battery? What does the name mean and what on earth are those numbers and letters printed on the side? Well, you’re about to find out.

DIY E Liquid Mixing – Beginners Guide

 If there’s one thing I do know it’s that there are way better reasons to quit smoking than saving money…but still, I remember someone, somewhere saying something about vaping being cheaper than smoking!

Well: there’s exactly zero truth in that, however, that said, I wouldn’t give this up for the world. It’s a passion, a hobby, an obsession and hell, it’s a cause worth fighting for!

Over the years vaping has become far more advanced and vape devices that allow you to consume nicotine are now really small compact. When vaping was first a thing, the vape devices were overly bulky and had been a challenge to transport around with you. 

Vape pod devices that can be purchased from the veexshop.com website is a great way to quit smoking today. My personal favourite currently is the WUUZ storm vape pen. It comes in a sleek looking design and it is very compact and is no bigger than a standard size USB computer flash drive. This makes it the ultimate portable vaping device for 2021 that also can provide high vapour production thanks to the coil that can handle up to 18 watts of power.

Quitting smoking using a vape pod system from the veexshop.com website will provide you with several health benefits. With vaping there is no tar created like there is with smoking tobacco, this is because nothing is being burned like with a regular cigarette. Vape pods create vaper by heating eliquid made from food with great ingredients and allowing you to enjoy great flavour with nicotine absorption.

The Affordable Art of DIY E Juice Mixing

So, why is vaping so pricey? Other than mods, coils, atomisers, and upgrades, the real catch is the e-liquid.

Back in the days of the cig-a-like I would take a month to get through a 30ml bottle of e-liquid…my, my, how times have changed!

Sitting here vaping at 85W on a 0.2 Ohm coil in a 6ml tank, I’ll fill this thing more than 5 times today, no lie! That’s 30ml juice in a day: that’s another reason why I don’t use nicotine anymore!

Every flavour junkie knows the impossible allure of the new release: there are too many juice brands to count, too many killer flavours on the market and more arriving every day, all backed up by killer packaging and tempting marketing campaigns.

I had to get out, terminally indecisive me couldn’t be faced with 1000 options every time I needed a new flavour. My pocket simply can’t take the punishment.

If you’re under the impression that you need some kind of degree to make e-liquid…you’re completely mistaken.

Man, was I pleasantly surprised by how easy it is to make your mixes from scratch and can I say: with the same amount of cash it would have taken me to buy two bottles of branded juice, I now have supplies enough to fuel my habit for 6 months!

What’s more, Mixing up a brew that’s equal unto some of the best offerings on the market now takes me less that 5 minutes: it’s that simple!

So, I’m gonna run you through the whole process of making e juice, how it works, what you need and where to get it and how to get to the creative and cost effective plateau I’m chilling on in a matter of weeks!

Benefits of DIY e-juicing

  • Cost: Can be as much as 40X cheaper.
  • Control: Control what you consume, know what you consume and change your levels at will.
  • The Uncertain Future: Well, luckily…the ingredients for DIY juice will still be available, regardless of what regulations, the law and taxing do to the e-liquid market. So you’ll still be able to vape, no matter what.

Firstly, a note on nicotine

Trust me, when you start making your own mixes and you realise how delicious, easy and cheap it actually is…you’ll be inclined to vape up even more juice than before, much like me.

A word of warning therefore: TAKE IT EASY ON THE NICOTINE. Vaping is about a lot more than just a nicotine addiction: I’m just as into vaping as I was when I had a 18mg habit…now I use 0mg and I vape even more, because I can. I have no lung problems, no headaches, no nausea!

When people talk about DIY mixing being dangerous, what they’re really talking about is the nicotine. Do yourself a favour, friends: if you’re sub-ohm vaping, try and keep your nicotine levels at 6mg and under.

  • Info: What is Sub Ohm Vaping?

A tobacco concentrate or a little extra PG will suffice to provide that throat hit you’re looking for and overall you’ll experience what I can only describe as a cleaner vape. But then again, I’m a bit pedantic when it comes to what I consume, each to his own and maybe the world’s the better for it!

You don’t need to use nicotine in your e-liquid but if you do, remember: nicotine is toxic at a certain level (+/-50mg) and is by far the most dangerous (possible) ingredient in e-liquid. It is quickly absorbed through the skin and you need to wear gloves when working with it.

Another factor to consider…nicotine and nicotine containing products need to be kept in a dark and cool place to avoid degradation.

Is Steeping Really Necessary For High VG brews?

While I have definitely noticed that my mixes taste better the longer they stand and the more often they’re shaken, that doesn’t mean that you can’t enjoy a high VG mix that was made 5 minutes ago.

I go through my juice so fast anyway that I barely get a chance to steep! Depending on the quality of your VG and your concentrates, you should be able to experience just as much flavour clarity as you did with your shop bought mixes.

I buy an exceptional quality VG and my mixes are always 80% VG , I favour it for both vapour richness and flavour.

I find the sweetness and inherent flavour in my VG means I needn’t add artificial sweeteners and I end up with delicious, wholesome flavours that didn’t require any excess of ingredients in order to achieve desired sweetness.

In fact, VG is tasty enough to be vaped on its own if you’re really in a fix and there’s still nothing better for cloud chasing!

  • Info: Guide to Steeping E-liquid Here.
  • Info: What is VG and PG in Vape Juice?

Should You Buy A Kit?

Well, a lot of people do…however, I’ve found kit’s to be a little on the expensive side, as opposed to buying your ingredients in bulk (I buy a 2l VG, a 500mlPG and flavours as I spot them).

You may also get a whole bunch of equipment that’s not entirely necessary, which also raises the cost.

On top of that, the flavours and bases you get in the average kit tend not to go nearly as far for your bucks as the things you can pick up independently for the same overall price.

Plus I’d rather mix and match and choose the flavours I really want, which is not always an option when you buy a DIY e-juice kit.

But.. If you have the budget and to start with while you find your e-juice mixing feet then a kit can be beneficial.

Equipment


Scale: you’ll need a scale that measures in grams up to 2 decimal places if you want to use the weight measurement method, a ‘tare’ function will also be a must. I personally don’t use this method, I measure using the ml markings on my syringes.

There are plenty of cheap digital scales available on Amazon.

Pipettes (disposable): These are useful for transfer of liquids in between mixing and holding bottles, as well as dripping flavours when you’re still in the tasting phase. They’re cheaper than syringes and can be used in place of them…they don’t have measurement markings on them and therefore if you use them, you’ll need to use a scale.

Also available on Amazon.

Syringes: I use these instead of pipettes as I like to do things the fast way and the measurements on the syringes allow that.

Available on Amazon

Bottles: While I personally prefer the plastic squeeze bottles just for ease off use during mixing and for final storage, the glass medicine dropper bottles are also popular…I find that the glass bottle caps tend to give in after a while and although the plastic bottles aren’t pretty, they’re just far more economical.

You must note though that it’s important to cover your plastic bottles with stickers or opt for shaded glass, especially if you’re going to be mixing with light sensitive nicotine.

Available on Amazon

Latex Gloves: My favourite part, hehe. Gloves are ESSENTIAL when working with nicotine and also plain useful for keeping your fingers juice free.

While you can use plastic gloves I find control is better with a latex glove in your size and also…latex gloves, if you don’t get them too dirty, can be rinsed and reused to save money (not pharmaceutically correct but then, neither am I).

Available on Amazon

Measuring Jug: I don’t use this method, I do all my measuring with syringes, but you can use a measuring jug also, or you can weigh out your ingredients on a kitchen/chemist scale.

Available on Amazon

The Ingredients

Okay, so DIY juice consists of 3-5 basic ingredients, all of which can be used in varying degrees to achieve different effects.

Vegetable Glycerin (VG) -Base (Pharmaceutical Grade)

  • Produces thick, delicious vapour that creates a smooth draw with no throat hit.
  • It’s naturally sweet and for those who find a high VG too sweet, there are bitter drops and sour bombs on the market that can rectify this, so you don’t need to up your PG too much.
  • Sub-ohmers and cloud chasers will prefer a higher % of this, it’s harder on coils but totally worth it for flavour, cloud and cloud…oh, and cloud.

Buy Classikool Kosher/Pharma Grade VG on Amazon

Propylene Glycol (PG) – Flavour Binder (Pharmaceutical Grade)

  • Binds to flavour and carries it to the throat to produce a stronger throat hit.
  • It produces little/no vapour (dependent on % mixed) and it has no taste.
  • Smaller device users and plus ohm vapers will prefer a higher concentration of this, it’s easier on coils.
  • Some people have an intolerance, if your chest closes or you experience a throat irritation, up on the VG, down on the PG.

Buy Pharma Grade PG Here On Amazon

Concentrate-Flavour (Food Grade, Oil and Sugar Free)

All your desired flavours, usually in a PG base.

You’ll either buy single flavours or so-called one-shot concentrates which are pre-mixed flavour combos without bases.

They need to be oil free, sugar free and approved for vaping, that’s why it’s best to go through a vaping company, instead of using food flavours direct…though there are some popular food brands that vapers trust.

  • The Flavor Apprentice ‘TFA’
  • Capella
  • Lorann
  • Inawera
  • Flavor Art

Your Flavor Types:

Primary:

These are generally either a Fruit (Including Cocktails)or a Desert flavour (Including Cereals).

Many concentrate brands have developed complex concentrates like Blueberry Cheesecake to Choc Mint Crunch or Mojito, many of these are delicious on their own.

I call any flavour that can be enjoyed alone a primary…but when it comes to getting creative, secondaries are very important!

Eg. Strawberry, Mango, Graham Crust Cheesecake, Fruit Loops Cereal.

Secondary:

These are essentials for those who want o get creative with mixing more than one flavor concentrate at a time…not only can these flavors serve to bind two dissimilar flavors into a harmonious mix, but they can take the edge of harsh flavours, spice up bland ones and hell, sometimes they’re even great on their own.

Think of these as your herbs and spices and depending how you use them and what your preferences are, another man’s primary could be a secondary for you.

Eg: Vanilla, Cinnamon, Caramel, Bourbon, Brandy, Tobacco, Honey, Creme De Menth, Custard, Cream, Butter, Mint…the list goes on.

Unfortunately, if you’re running from the unholy number of e-juice brand choices on the market, like me, DIY e-liquid doesn’t actually completely solve the problem.

There are still a huge number of flavour concentrate producers on the market and whoa, there are even more flavours.

Here are my rules of thumb: I started by trying out a secondary flavour, a common primary fruit and a common primary desert flavour from three top concentrate manufacturers and then I went with the one that delivered on all three or scored the highest overall.

From there on I tried to select flavours that I liked enough (or thought I would) to have on their own, in both the fruit and desert categories, as well as a bunch of handy secondaries, my faves being caramel, creme de menthe and custard as I’ve found that a dash of these can spice up almost any mix…particularly smoky caramel!

Understanding E-juice Recipes:

You may have read an e-juice recipe before and wondered what is meant by the percentage next to your ingredients e.g.. Strawberry 5% Custard 2% Cream 2%.

It’s simple, those percentages are percentages of your bottle as a whole, so if your whole bottle of e-juice is 100% and the bottle is 30ml then 5% Strawberry means 1.5ml Strawberry!

The reason we use percentages is so that it’s easier for you to adjust your recipe to suit your desired batch size if the measurement is given this way.

Depending on your favoured concentrate brand, you might find a happy median when it comes to mixing with different flavour types, a sweet desert may require a smaller percentage in general, while a tart fruit may require a higher percentage, especially in your sweet VG.

So where do you start?

Don’t get carried away!

There are a lot of outstanding flavour concentrate manufacturers on the market… The Flavor Apprentice ‘TFA’ is one (I tend to use their flavours only), Capella, Lorann, Inawera, Flavor Art and Hangsen are also popular brands…

Decide on your ratios…

If you’re going to be using nicotine, my advice is that you buy it pure and not in a VG/PG solution as the nicotine won’t necessarily be in perfect solution but will be concentrated at the bottom.

You don’t want to end up with an inaccurate measurement of the nicotine in your product because one time you shook the VG/Nicotine bottle for a little longer than the other time and I don’t enjoy anything that requires extra shaking.

For a a great blend of throat hit and cloud production, opt for 70VG/30PG…cloud chasers or people with PG intolerance like me will opt for 80%VG or more.

Those who’re using a smaller device like a cig-a-like or a mouth to lung vape tank above 1.0Ohm …you’ll need to opt for a 50/50 ratio (60VG/40PG on some tanks), because of the thicker consistency of the VG, which can be hard on your coils.

Download An E-liquid/E-juice Calculator:

As one who seldom uses nicotine, I don’t really have need of a calculator. I just dive in with my flavours, guns blazing.

However, calculating nicotine strength can be a tricky business where you need to factor in desired strength, the strength of your nicotine solution and the intended batch size.

A good e-juice calculator is going to take care of this for you!

Best E Liquid Calculators

  • Make My Vape e-juice calculator – Use Here
  • Steam Engine Juice Calculator – Use Here
  • E-Liquid Recipes Calculator – Use Here

Some Vape Calculators that are used for calculating build ratios on RDA’s etc, also have DIY juice functions, brows Google Play and iStore and try out your options if these aren’t to your liking.

If you’re ready for it, I’d advise you get creative with your own unique mixes based on flavours you know and love…I started by trying to replicate ready made mixes when it came time to get creative!

If you’re not that way inclined…check out these top e-juice recipe sites for some great ideas and if you ever stumble on a winner, why not post your recipe on one of them too?!

Best E Liquid Recipe Sites

  • AllTheFlavors.com
  • 99Juices.com
  • E-Liquid-Recipes.com
  • MakeMyVape.com

The thing to realise is that a lot of these flavour concentrate manufacturers make concentrates that are spectacular alone…take toasted marshmallow or banoffee pie for example: start out by trying them alone with your PG/VG/Nic blend and thereafter you add and mix when you’re not 100% happy with the flavour concentrate on it’s lonesome.

I still enjoy my cheesecake with graham crust and my marshmallow without even bothering to add a second flavour!

Some of my favourite mixes involve just two flavours. Fruit creams and caramel anything (eg. caramel mint) do it for me too, you’d be surprised!

Mixing too many can confuse the senses and leave you feeling kinda gnarly so slow down and don’t get carried away!

I’m a big fan of the DIYorDIE website and their video lessons on DIY juicing, check it out.

Step By Step instructions On Making Your Own E-Liquid

Pre-Mix:

Don your latex gloves and lay out all your paraphernalia on a decent sized work surface where you’ve easy access to everything. When working with larger bottles, make it a habit to close bottles directly after use. I like to decant my bases into smaller squeeze bottles.

Mix:

Step 1:

Measure out your VG and either pipe it or pour it through a funnel into your mixing bottle.

Step 2:

Combine your (optional) nicotine and your PG, dissolving your nicotine in PG first will make it easier to combine with the thicker VG later. Plus, you need to have your desired nicotine in solution when you’re going to start adding flavour because flavour is hugely impacted by nicotine.

Adding flavour first, or testing flavours before adding nicotine is going to throw you right off. 
Step 3:

Combine your Nicotine/PG solution or just your PG (if you’re nicotine free) and your first desired flavour.

Shake this solution well, until it looks completely consistent…don’t taste this as it will be incredibly harsh without VG.

You may choose to follow this step or alternatively, for more add hoc mixing, you’ll combine your Nic/PG solution with your VG and then add flavor drop for drop.

Step 4:

Pipe/funnel your flavour solution into your VG base in a mixing bottle (I use a large, 100 ml plastic squeezy bottle for this, the same kind that you buy some vape juices in, only bigger). Shake like hell.

Step 5:

If you intend on steeping or keeping the liquid a while, keep in mind that any taste now will likely mature, smooth out and become a little richer over time.

If budget allows there are also magnetic e-liquid mixers available that gently heat and mix. Not used one of these yet but they look interesting!

Now’s time to taste, drip a little on your dripper (I like to use a dripper when mixing, it’s the only way to test unfinished flavours without wastage) and taste, now you’ll add extra concentrate, drop at a time to your taste.

Whether mixing something complex or simple…don’t be afraid to experiment but remember, YOU CAN ALWAYS ADD, YOU CAN NEVER TAKE AWAY!

Troubleshooting:

A Harsh Throat Hit?

  • There are two possible causes, your Nicotine or your PG…anything above 30% PG is going to start being harsh in the throat.
  • Too much nicotine will make you slightly nauseous also and too much PG will give you a low vapour production.
  • If you’ve added too much PG, add more VG to taste.
  • If you’ve added too much nicotine you’ll need to make a batch with the same specs and no nicotine to add into the solution.

An Unsavoury Taste.

  • Well, this is a serious one… You need to mix up a batch of your PG/VG/Nic solution without any flavouring first, to make sure that your planned ratio will produce at least a base that’s to your liking.
  • If you continue to struggle with the base flavours, there’s a chance your bases aren’t up to standard…be careful where you buy these!
  • Once you know that the base ratios are to your taste, the only remaining problem can be your flavour mix.
  • When I first purchase a flavour concentrate I make a point of starting with the smallest dose in my favoured solution, without any added flavours, so that I can get a feel for that concentrate on it’s own: how does it taste in when I add a 5% solution? Is it too much when I add a 15% solution.
  • If you get no joy out of a concentrate alone…set it aside, it may be of use later, when your tastes change or you may need to look to a different brand if this is a common problem for you. This will give you an idea of what flavours can be used as primaries and which ones are only suitable as secondaries.
  • If you’re not happy with your mixes, try testing out other peoples recipes…learn from those who’ve mastered it.

You’re probably thinking, WTF? Nope, believe it, it’s that simple!

Sure, there are flavours on the market that I most definitely cannot match and still get the urge to buy (and more coming every day) but since I started DIY I kinda feel bad for folk who don’t realise how easy and affordable it is or who’re scared to take the plunge…it’s changed my outlook, my tastes and it’s saved me an absolute fortune.

Plus, if your friends give your flavours the thumbs up, maybe you’ve got a knew career option to look into.

Man, I was stoked recently when I went to a vape fest with my very first home mix and at one point, a rather good looking vendor had a toke on my dripper (he was working on my mech)…he exclaimed: “Damn, that’s delicious, what juice is this?!” I felt pretty awesome.

I think I’d mixed two desert flavours together, burnt caramel and cheesecake or something, I’d just squeezed out half of each 10ml concentrate into a 30Ml bottle of 80VG20PG in an absolute rush and shaken in the car.

Goes to show…less is often more, you’ll learn to appreciate the simple mixes, like I do.

I obviously didn’t mention how easy it had been to make!

Do you make your own vape juice? Let us know in the comments below!